The use of tree crushers is relatively reliable and environmentally friendly. It can actively adjust the feeding speed according to the load of the motor to prevent the equipment from running at full load. What is the earthquake resistance foundation of this type of crusher? Here is the editor's summary:
1. Mainly, when selecting a wood crusher, its type matches the motor. In view of the area of the motor, it is easy to see the defects of the motor, such as heating or even burning. Secondly, the machine equipment is getting better and better. One step in the performance; The falling or wearing of other fan blades will also cause the motor to heat up. At this time, you need to find out the motor, check whether the blades have fallen off or are worn, and solve the problem in time. Secondly, the rated power of the motor of the machine is too high. If the wind speed is too high It will be too late to blow out the air outlet under high and strong winds, resulting in low output. Repeated damage to the furnace cycle material will also cause the motor to heat up.
2. Open cycle and closed cycle In production, the cycle is divided into closed cycle and closed cycle. The former is called the sieve before destruction, and the latter is called the sieve after destruction. In actual production, it can be opened or closed according to production needs. Closed. Loop selection.
3. Load: The operation process of the tree crusher is carried out within closed-loop control. With the addition of the exhaust port and cyclic load, the appearance of the stone will become better. During the whole process, due to the addition of cyclic load, various types of materials in the system will The wear and tear of the equipment increases, but when the discharge port is increased, the load of the main crushing motor can be reduced, and the appearance of the finished product particles becomes better. Therefore, it is important to adjust the cycle time load in production.
4. Feeding particle size: Compared with wood crushers, the standard sizes of different types or types of processable feeding materials are different. If there is a problem with the feed particle size, the output quality will not be qualified, so the feed particle size should be Meet the requirements of the production machine. Do not let large ores and uncrushed materials enter the crushing chamber. Although there is a good steel maintenance system in the crusher, the aggressiveness of these uncrushed materials will not only affect the output quality, but also This will increase the workload of the crusher and easily cause the crusher to break.
The tree crusher has the characteristics of large crushing rate, high efficiency, smooth operation, simple structure and convenient operation and maintenance. I hope this article will be helpful to you.
