Wood crusherIt has effectively solved green waste to a large extent, made a great contribution to China's forestry industry, completed resource recycling, and also generated some benefits for ordinary people. Some customers said that after a period of time, the production volume of the crusher will decrease. Decline, let’s take a look at what caused it today.
1. Moisture content of crushed raw materials
Wood with relatively high humidity will be very sticky, which will cause wear and tear on the cutter head of the crusher. Strong wear of the cutter head will also reduce the production volume. The high air humidity of the crushed materials is easier to adhere to the wire mesh during the unloading and conveying process. , and then block the wire mesh, causing the level of crushing to decrease, and the production volume will naturally decrease.
2. Hardness of raw materials crushed by wood crusher
For the same equipment, the production volume will be different if the hardness of the crushed raw materials is different. However, raw materials with high hardness will undoubtedly cause more serious mechanical wear, so the crusher must be maintained frequently.
3. Loss of cutter head
When the crusher works for a long time, the loss of the cutter head is still quite large. The sharpness of the cutter head is directly related to the product output and crushing efficiency of the crusher. After a period of time, you need to check the wear degree of the cutter head. If the wear is serious, you can use a knife sharpener. Carry out polishing. Depending on the degree of wear, decide whether to replace the tool head.
4. Wear of wire mesh
When the materials crushed by the wood crusher pass through the wire mesh, they will collide and rub with the wire mesh. Therefore, the wire mesh will be worn and damaged after being used for a long time. When various problems occur in the wire mesh, the material will be unevenly distributed. , the crushing efficiency will decrease, and in severe cases, waste may occur.
