If usedtree grinderWhen recycling waste wood during production and processing, a large amount of smoke and dust often fly out, which leads to dust hazards at the production site. This not only affects the physical and mental health of personnel, but also affects the working environment of the wood crusher. If the treatment is not implemented in place, it will cause severe pollution to the surrounding environment. In the long run, it will not only bring certain safety hazards to the physical and mental health of personnel, but also cause serious harm to the surrounding environment. What is a good way to deal with it?
wood crusher
It is necessary to first understand where this dust flies out of the wood crusher. It usually flies out from the discharge port. Because the waste wood enters the internal structure of the wood crusher and is discharged after processing, part of the dust will interact with the crusher. The materials go out together and then scatter in the air, causing dust hazards. In this case, we can solve the problem with a bag dust collector. The bag dust collector collects the broken materials, then collects part of the smoke and dust, and discharges the broken materials. In this way It can well avoid dust hazards. However, there is also a disadvantage of using a bag dust collector, which is that we need to clean it frequently in the future, because when more dust adheres to the surface of the bag dust collector, it will seriously affect its use effect, and thus the dust removal cannot be achieved. In this case, you need to remove the bag dust collector. The more dust adheres to the surface of the bag dust collector, the faster it can be washed, the better.
tree grinder
In addition to dust flying out from the discharge port, there may also be dust flying out from the fuselage. This is mostly due to the fact that the equipment has been used for too long, causing some gaps in the fuselage. Of course, it may also be due to the equipment itself. The quality is not up to par, and there are some small gaps. During production operations, dust will fly out through these gaps, causing dust hazard problems. In this case, we need to deal with it through welding repairs to find out the fuselage. Welding repairs are used to ensure tight gaps in the joints to prevent dust from flying out of these gaps during production operations.
wood crusher
Only in this way can we deal with the dust hazards of the tree crusher well. You can choose according to your own situation. Remember that our country is currently in the green development stage, so we must pay attention to the corresponding green requirements in production operations.
