Everyone knows that biomass crusher equipment is a machine that specializes in crushing and processing wood into sawdust. However, if the selected material is a raw material with too much water, it will reduce production efficiency and affect production volume. Therefore, in order to achieve the purpose of crushing and processing wood without affecting production volume. Next, how should we deal with the wet wood raw materials of the biomass crusher? Let’s learn about it together:
First of all, the moisture content of general wood raw materials should be less than 12%. Under normal circumstances, if it exceeds this value and is not very high, it can be crushed. However, if it exceeds the normal ratio by too much, it will affect the production capacity of the biomass crusher. Therefore, the root cause of the problem we deal with is the humidity of the selected raw materials. We can dry the raw materials in an economical way and reduce the humidity of the raw materials through natural drying and sunlight exposure. If for some reasons everyone cannot do it If you want to dry the raw materials naturally, it is recommended to invest in a drying equipment. The normal process of crushing wood chips is to dry them first and then crush them. Then according to the specific requirements, the crushed raw materials can be maximized to make machine-made charcoal and pressed into Pellets are a good choice. It mainly depends on personal requirements. Our suggestion to you is to first choose economical and environmentally friendly methods to dry the wood. This can help you reduce expenses to a certain extent. If the specific situation does not allow it, then Select the drying process.
In wood raw materials, wet raw materials contain high fiber content, which will affect the crushing work of the cutter head and hammer of the biomass crusher. Over time, it may also cause the screen to be blocked and the cutter head and hammer to be damaged. ; Dry wood raw materials contain a small amount of fiber, which will not affect the hammer blade and cutter head, and the natural production volume can keep up. This is also the practical experience compiled by front-line workers over a long period of time, so we hope that everyone Before purchasing a wood crusher, you should first solve the problem of the dryness and wetness of the raw materials, so that the production volume will not be low in subsequent production work.
