To put it bluntly, a tree stump crusher is an industrial equipment used to crush wood, but it is not sufficient for crushing wood, and the production volume will vary depending on the specifications. Of course, it will also have different impacts on the economic benefits of the company. , so what aspects can affect the production volume of the stump crusher? Please see below:
1. Selection of raw materials. The stump grinder has many functions and a wide range of applications. There are countless types of raw materials that can be crushed. Different raw materials have different growth structures and material densities, such as straw and weeds. It is easier to crush, but redwood and fir are not easy to crush, so the selection of raw materials is a very important factor for the production volume of stump crusher.
2. Moisture content of raw materials. This problem must be familiar to everyone. For example, harvesting wheat that has not been dried is not as easy as drying, and pine branches are more fragile than freshly harvested branches. All of these are It is due to the difference in moisture content. And too high moisture content will not only reduce the production volume of crushing, but also if the material particles are too small, it will easily block the screen, so we have to dry the raw materials with higher moisture content. Then crush it and it will be very easy to handle.
3. Particle size. This is not very difficult to understand. The production volume of the wood chipper is definitely higher than the unit production volume of the wood flour machine. The denser the powder, the lower the production volume will be. The wood that does not meet the requirements will be The crushing continues in the machine chamber until the materials are crushed into materials that meet the specifications and will leak out of the screen. Therefore, there is also a very important relationship between the production volume and the size of the product particles.
4. Power problem. The reason why the power problem is taken into consideration is that different specifications are generally equipped with suitable motors. A certain increase in power cannot fully increase the production capacity of the equipment, and may also damage the stumps. machine, so when we purchased the crusher, we asked the manufacturer if it could match the power we wanted. This is the key among the keys.
