To adjust the gap between the compaction plates of the tree stump crusher, you can use the nut on the hinge of the pressure plate to adjust the distance between the pressure plate and the main shaft bearing. Adjust it to the high quality of the pressure plate and main shaft bearing based on the actual situation. There is a gap of about 1cm. If the gap is very large, it may leak. If the gap is too small, the picking spindle will hit the pressure plate to create a V-shaped groove, thereby damaging the component.
By adjusting the positional relationship between the adjusting plate and the round hole on the support frame, the torsion spring supporting force of the pressure plate of the stump grinder can be adjusted. From the rotation of the adjusting plate until the torsion spring just contacts the pressure plate, the front cotton picking head continues to rotate and adjust to the adjusting plate. The 3 holes of the cotton picker are adjusted to 4 holes, aligned with the holes fixed on the fixed plate. Support the bracket and insert the flange screws. When adjusting the stump grinder, you first need to adjust the pressure plate on the top of the cotton picker head, just Tighten the pressure plate on the cotton picking head only if necessary.
The length of the booms on both sides of the front beam of the cotton picking machine is adjusted. During the operation period of the stump crusher, the front roller is 21mm lower than the rear roller, which allows the picking spindle to touch more cotton and allows the residue to be discharged from the cotton spinning machine. .The bottom end of the cotton picking machine head is outside and needs to be tilted in the cotton warehouse.
Basic principles of stump grinder:
The raw materials are manually placed in the feeding port and rotated by the high-speed gear roller, and then the raw materials are fed into the knife cutting structure. The high-speed cutting head and hammer are used for crushing and grinding of high-speed airflow The relative speed of the tooth plate is ground into loose pieces and thin strips, and these pieces and thin strips are thrown out of the body by the fan. The length of the material can be adjusted according to the gear change.
This series of stump crushers is a multi-functional machine and equipment, which is also a crusher for farmers. In order to solve the problem of straw consumption in the breeding process, this equipment can usually crush the remaining straw of cattle, sheep, horses and other livestock. , and uses the principle of high-speed cutting to break them into filaments at once, and the size and width can be adjusted at will. This equipment can also break crops (such as straw) into foam, and has won praise and recognition in daily life. It is suitable for feeding small animals such as geese.
This equipment adopts the fully automatic feeding system of stump crusher and the principle of multi-blade cutting. It can make various straw and fresh straw powder into satisfactory results according to needs. This equipment is mainly aimed at: green, wet and dry Straw, the crushing particle size can be adjusted, which is also the humanization effect of the machine equipment, because not only can fresh straw be broken into sawdust, but its size can be automatically adjusted.
