If a wood crusher is used to process waste wood recycling, a lot of dust will often fly out, which directly causes smoke pollution at the production site, which will not only have an impact on the health of the workers, because the wood crusher There are restrictions on the working environment and other aspects, so the smoke and dust treatment is often not implemented in place but it causes pollution to the surrounding environment. In the long run, it not only brings certain safety hazards to the health of the workers, but also causes interference to the surrounding environment. So what are the good methods? Can it be solved?
First of all, you must understand which part of the wood crusher the dust flies out from. It usually flies out from the feeding outlet, because when the waste wood enters the inside of the wood crusher and is processed and then loaded, some of the dust will mix with the crushed raw materials. Go out together, thereby causing smoke pollution problems in the air. In this case, we can solve the problem through bag dust removal equipment. Bag dust removal equipment is used to collect and crush raw materials, and then collect part of the dust and discharge the crushed raw materials. This can It is very good at preventing smoke and dust pollution. However, the use of bag dust removal equipment also has a drawback, which is that we need to clean it frequently in the future, because the more dust adheres to the surface of the bag dust removal equipment, it will affect its use effect and thus fail to achieve dust removal. In this case, we need to remove the bag dust removal equipment. The more dust adheres to the surface of the dust collector, the faster it can be washed, the better.
In addition to dust flying out from the feeding outlet, dust may also fly out from the casing. Most of this is mainly because the equipment has been running for too long, causing a small gap in the casing. Naturally, it may also be due to poor quality of the equipment itself. It is qualified, but there is a small gap. During processing, dust will fly out through this gap, causing smoke pollution problems. In this case, you need to use welding repair method to find out the problem on the casing. For gaps, use welding repair to ensure a tight fit to prevent dust from flying out of these gaps during processing.
Only in this way can we effectively solve the problem of smoke and dust pollution from the wood crusher. You can choose according to your specific situation. You must know that our country is currently in the stage of green development, so we must pay attention to the corresponding green requirements in production operations. .
