tree grinderWhat must be paid attention to before starting, application process, and cleaning to achieve efficient and safe production.
Before starting the crusher: Before starting, you should develop a good habit of checking the equipment. First check whether the screws and belts are loose, whether the rotation angle is appropriate, and whether there is any jamming in the equipment.
During normal operation, if the problem of equipment not turning suddenly occurs, you should check whether the bearing is damaged. If the bearing is damaged by more than 90%, it must be replaced. After the bearing is replaced, technical inspection should be carried out again to determine the load. The deflection and other parameters comply with the relevant standards of my country's machinery manufacturing industry. In the future use process, the bearings are also required to be regularly protected and maintained. During normal operation of the tree crusher equipment, the problem of the equipment not turning over suddenly occurred. , you should check whether the bearing is damaged. If the bearing is damaged by more than 90%, it must be replaced. After the bearing is replaced, technical inspection should be carried out from the beginning to determine the load, deflection and other important parameters in line with my country's machinery manufacturing industry. Relevant standards also require regular protection and maintenance of rolling bearings in future applications.
When using the pulverizer: When the pulverizer is operating, you must be careful not to let the parts of your body get caught by the main shaft of the motor, such as hair and corners of clothes; there are also belts, so be careful when feeding materials and do not let your fingers get caught. Clamped, if caught, the person will be slightly injured or severely fractured. Below is the hammer of the crusher. The hammer blade is used as the main crushing component of the tree crusher, and its lethality cannot be ignored. There is also a discharge port, and there is no equipment equipped with a blower. There is no need to stand at the discharge port of the crusher, because the material is discharged in a heavy or fast manner, and the body will inevitably be harmed if it hits it.
