Tree crusher manufacturers have a tradition. After customers use tree crushers for a while, they should conduct regular surveys on some middle-aged and old customers. Similar to questionnaires, we collect some of the customers’ thoughts after long-term use and provide timely feedback to the manufacturers so that we can have goals. To improve, similar questionnaires are to collect some ideas from customers after long-term use, and provide timely feedback to the manufacturer so that they will not cause malfunctions.
1. When the tree grinder is operating, there should be no jamming or friction sounds. If there is any abnormal sound, it should be shut down immediately for inspection.
2. The starter motor operates with light load and can only operate with full load after all parts are in normal condition.
3. The mesh screen should be installed firmly and sealed without leakage, and the screen frame should be firm.
4. If there are abnormal noises during operation, materials are jammed, rolling bearings are jammed, or the motor is very hot, stop it immediately and find out the cause and solve it.
5. After the work is completed, the equipment should be idle for 2-3 minutes. No remaining materials should be left inside. The equipment can be shut down only after all the remaining materials have been discharged.
6. Strictly implement regulations during production operations to ensure production. It is strictly prohibited to increase the speed of the tree crusher casually. Check the opening and closing pins frequently. If there is serious wear, replace it with a new one in time.
Above, our manufacturer has summarized some common minor problems through customer feedback over the past few years and provided solutions and precautions. At the same time, we must keep in mind the importance of production.
