When using mechanical equipment such as multifunctional wood crushers, safety is always the first priority and should be given sufficient attention. Safety here mainly includes two aspects: 1. Ensure personal safety, 2. Ensure safe and smooth operation of the equipment.
Ensure personal safety:
As long as you wear reasonable safety equipment and use the equipment responsibly in accordance with the multifunctional wood grinder operating instructions, using a wood chipper is not dangerous.
1. Wear close-fitting safety clothing, protective shoes, safety helmets and safety gloves. The surfaces of tree poles, wood, etc. are usually rough or even sharp. Wearing safety gloves can prevent the debris from scratching or pricking your hands. In order to protect the brain To protect your body from external objects and to move safely and conveniently, you cannot do without the protection of close-fitting safety clothing, protective shoes and safety helmets.
2. Wear safety glasses. The formation of sawdust is accompanied by a lot of tiny dust, which will affect the eyes; sometimes larger debris will be thrown out, so it is extremely important to wear safety glasses.
3. Wear ear protectors. The operating noise of many wood chippers far exceeds 75 decibels, and long-term exposure can easily cause hearing loss, so wearing ear protectors is indispensable when using wood chippers.
4. Always ensure that the multi-functional wood crusher is in a safe shutdown state before operation, and cannot deflect the discharge port to the direction or area where there are people and maintain a safe distance of 20 meters.
To ensure safe and smooth operation of equipment:
Attention! Attention! Attention!
Never try to force a piece of wood into equipment that does not fit the size of the feed opening or exceeds the specified large lumber diameter!
1. Before you try to process large pieces of wood, take a moment to separate them, otherwise you will spend more time and money repairing or replacing your wood chipper: If you try to cut a 4-inch tree pole Putting it into a multi-purpose wood chipper designed to crush up to 3 inches in diameter may damage the motor, or clog, dull or even crack the blade.
2. Even if you put materials of reasonable size into the wood crusher, you need to ensure that it is slow and steady. Because inputting too much material into the wood crusher at the same time may damage the motor, or block, dull or even crack the blade. and other risks.
3. Also note that some plants, such as moso bamboo, rattan and other fibrous plants, may wrap around the blade instead of being cut directly. Therefore, it is not recommended to use a wood crusher to process non-wood materials.
4. When conveying wood, always start from the thicker end, i.e. the canopy cannot be safely funneled into the chipper.
5. Replace wearing parts and maintenance equipment within the specified time.
