Energy saving and environmental protection for customerstree grinderWhen making wood pellets, some use wet wood to process, and some use dry wood to process wood pellets. The dry humidity of the wood directly affects the grinding effect and production capacity of the wood flour machine. Customers are very good at processing wood. After drying, still dry it in the sun, and then crush it, so that the crushing effect will be better. The humidity of the wood environment is too high. During the operation of the wood flour machine, it is easy to block the diameter of the stainless steel screen, making it difficult to cut the material. Expansion will cause mechanical failure. If the humidity of the wood environment is too high, long-term use will affect equipment damage, rust, etc. Therefore, in order to extend its service life, it is best to dry the wood or let it dry. The humidity of the wood environment is too high. , the wood made of it is easy to deteriorate if it is not processed in time.
Normally, when wet wood is being produced, the material used by the wood crusher to hit the wood with the hammer head is all fibrous. If there are fibers, it will affect the operation of the hammer head and reduce the working efficiency. The production volume is much smaller. If you use dry wood, there will be much less fiber in it. The material will be easily broken when the hammer and blade hit it, which can break the wood more. If it is fine, it can meet the production volume requirements. If wet wood is used to make wood velvet with a wood flour machine, the effect will definitely be better than dry wood, so making wood pellets still depends on the type of raw material.
