The working intensity of large wood crushers is relatively high when they are used, so we need to do a good job of maintenance when using them. In the maintenance work, lubrication is very important. Let’s take a look at it together below. Let’s see how to do a good job of lubrication.
1. It is necessary to lubricate the friction surface in time, so that the equipment can operate smoothly and extend the service life of the equipment. Therefore, it is more appropriate to add grease after a total of 400 hours of operation; a total of 2,000 hours of operation. Afterwards, the spindle assembly needs to be opened and the bearings cleaned; after a total of 7,200 working hours, the bearings need to be replaced with new ones. Of course, if the bearings are well maintained, the use time can also be extended.
2. Before starting the equipment, grease needs to be added to the contact point between the toggle plate and the toggle plate pad; the amount of lubricant added to the bearing with seat should be 50-70% of the capacity, and the lubricant needs to be replaced about once every 36 months. When replacing a large wood crusher, you need to use clean gasoline or kerosene to clean the raceway of the bearing, and then replace it with new lubricant after cleaning.
3. Bearings usually need to be refueled using a grease cup. Basically, it needs to be added once an hour or so. Drip engine oil into the toggle plate and add it once every half a day.
4. If the environment is relatively cold in winter, a relatively thin lubricant can be added to prevent condensation. After addition, sealing and solidification should be done to minimize the entry of debris and other factors that affect the lubrication effect.
What is introduced above is the lubrication work of large wood crushers. When operating, we need to pay attention to operating in a reasonable manner and replace lubricants on time. Here, the editor reminds us that when choosing lubricants, we must choose lubricants produced by manufacturers. , so that the quality is better and the after-sales service is better.
