The wood crusher uses a cutter head to continuously cut the material to achieve crushing effect. During this process, the cutter head will inevitably cause friction with the material, and in the long run, this will cause damage to the cutter head. Too much, damage and other situations occur, so every ten days or so we have to check how the cutter head is being used. If we find that the cutter head is damaged, we must polish it as soon as possible to prevent the damage from getting more serious. If it is damaged Obviously, the only way to replace the cutter head is to replace it with a new one. Let me remind you that you can introduce lubricating oil to the surface of the cutter head to reduce the friction between the cutter head and the material, thereby reducing the damage to the cutter head. degree purpose.
In addition, everyone should pay special attention to the following four points:
1. After the wood crusher has been working for 8 hours, it can be shut down and rested. Pay special attention when shutting down, stop feeding first, and then turn off the power. Especially in summer, when the temperature is hot, shutting down can play a role. The effect of cooling the equipment.
2. For each working trip, salted butter needs to be added to the wood crusher. You can use a grease gun to add. During the adding process, special attention should be paid not to overdo the salted butter.
3. After the work is completed, the equipment must be cleaned, especially the internal structure. When cleaning the internal structure, you can use various props in the tool kit to open the casing of the equipment and carefully inspect the internal structure. Clean the remaining wood chips in the equipment.
4. Check each component. Before starting the machine, check the stability of the screws, the tightness of the 3-angle belt, and whether wearing parts such as the screen and cutterhead are damaged, and then replace them as soon as possible.
