To adjust the gap between the tamping plate of the tree stump crusher, you can use the nut on the hinge of the pressure plate to adjust the distance between the pressure plate and the main shaft. In practice, adjust it to the high quality of the pressure plate and main shaft. A gap of about 1 mm. If the gap is large, leakage may occur. If the gap is too small, the picking spindle will draw grooves on the platen, thereby damaging the component.
By adjusting the relative position of the adjusting plate and the round hole on the bracket, the spring tension of the pressure plate of the stump grinder can be adjusted. From the rotation of the adjusting plate until the spring just contacts the pressure plate, the front cotton picking head continues to rotate and adjust to the three holes of the adjusting plate. , adjust the rear cotton picker to the 4 holes, aligned with the holes fixed on the fixed plate. Bracket, insert the flange screws. When adjusting the stump grinder, first adjust the pressure plate on the cotton picker head, only when necessary Tighten the pressure plate on the cotton picking head.
By adjusting the boom length on both sides of the front beam of the cotton picking machine, during the operation of the stump crusher, the front roller is 21 mm lower than the rear roller, which makes the picking spindle contact more cotton and allows the residue to be discharged from the cotton spinning machine .When the bottom end of the cotton picking machine head goes out, the tilt should be adjusted in the cotton warehouse.
Basic principles of stump grinder:
The raw materials are manually placed in the feeding port and rotated by the high-speed gear roller, and then the raw materials are fed into the knife cutting structure. The high-speed blades and hammers are used for crushing and grinding by high-speed airflow. The relative movement of the tooth plates is ground into loose fragments and thin strips, which are thrown out of the machine body by the fan. The length of the material can be adjusted according to the gear shift.
This series of stump crushers is a multi-purpose equipment, which is also a type of crusher used by farmers. In order to solve the problem of straw consumption during the breeding process, this equipment can crush the remaining straw of cattle, sheep, horses and other livestock. And uses the principle of high-speed cutting to crush them into filaments at one time, and the length and width can be adjusted freely. The equipment can also crush crops (such as straw) into foam, and has gained praise and trust in families. It is suitable for feeding Goose and other small animals.
This equipment adopts a fully automatic feeding system and a multi-blade cutting principle, which can make various types of straw and fresh straw powder into ideal needs according to needs. This equipment is mainly aimed at: green, wet and dry straw, and the crushing particle size can be automatically Adjustment, this is also a humanized function of the equipment, because at this stage it can not only crush fresh straw into sawdust, but also its size can be automatically adjusted.