The wood crusher must operate at a specific speed, and overspeed and overweight applications are prohibited. When replacing the reinforcements of the movable cutter head and the fixed cutter head, 8.8 bolts and 8 nuts must be used, and low-level bolts and nuts cannot be replaced. Cap. If any abnormal noise is found during operation, it should be stopped immediately for inspection. The power must be disconnected before inspection, and fault detection is prohibited while the equipment is running. The amount of material fed should be appropriate, too much will easily cause overload stalling. .Of course, too little or too little will affect the cutting efficiency.
The motor serves as an auxiliary power supply. The power is transmitted to the main shaft. The gear shaft on the other side of the main shaft transmits the changed power to the compressed grass through the reduction box, cross shaft, etc. The material to be processed enters the upper and lower pressing grass and presses the grass at a high speed. The knife is fed into the cutting tissue. After being shredded by the high-speed cutting machine, it is thrown out of the equipment through the grass outlet. There are many types of wood crushers, but the construction principles are quite different. Each model of wood crusher The crushers have the same construction principle and are driven by a motor to drive a cutting wheel equipped with a favorable blade to achieve guillotine cutting. The performance of the machine is very critical and manufacturers, suppliers and customers should pay attention to it.
Improper handling of the diseased wood crusher can easily cause malfunctions. Issues such as returning straw to the field, drought resistance and water locking, reducing the use of chemical fertilizers, saving costs, and protecting ecological and environmental protection have a major impact on the sustainable development of agriculture. Therefore, farmers are more We are looking forward to applying the affordable and affordable wood crusher. Therefore, we have developed a type of wood crusher. This equipment has passed the system test and has been implemented in stages. It has been welcomed by many customers and friends. Excellent social and economic income.
Repair and maintenance:
1. Be sure to check whether the reinforcement is loose and tighten it.
2. Enhance the protection of seated bearings, couplings and transmissions, and add or replace lubricants and grease on time.
3. For wood crushers with adjustable cutting angles, the cutting seams should be adjusted reasonably according to the thickness of the crop straw to ensure the normal operation of the wood crusher.
4. If you find that the edge of the cutter head is dull, please use a whetstone to polish the movable cutter head.
5. After each shift of operation, the dust on the equipment should be cleaned in time. After each quarter of operation, the debris in the equipment should be cleaned, and anti-rust agent should be applied to the operating parts and placed indoors for ventilation. Dry location.