How to solve the dust problem during the crushing process of large wood crusher? Regarding this problem, this dust removal device cannot be underestimated, but it plays a key role in dust-free energy saving.
The dust collector equipment of large wood crushers mainly includes a single pulse bag dust collector. The dust removal system generally includes a dust jacket, a cooling fan, a piping system and accessories. Dust collector dust jacket: it is a ventilation dust collector The key component of the system. For large wood crushers, its function is to collect dust from the dust source to prevent dust from spreading into the operating environment. Whether the planning and installation of the dust jacket is reasonable directly affects the operation of all ventilation and dust removal systems. Reliability and efficiency. Generally based on its principle, the dust cover is divided into a closed cover, a casing, a receiving cover and a blowing and suction cover.
The problem of wheat straw feeding in large wood crushers is the angle and position of the feeding port: when the angle of the feeding port is too large, the inclination will be reduced, which will cause the feeding to be not smooth and affect the feeding of the equipment. Secondly, , if the position of the feed inlet is too high, it will also cause difficulty in feeding the material. The knife cannot cut the material, which will cause difficulty in feeding the material.
The main machine is composed of feeding mechanism, guillotine cutting mechanism, kneading and crushing mechanism, bag sealing mechanism, transmission mechanism, transmission device, protection equipment and frame. It has the characteristics of reasonable structure, convenient movement, automatic feeding and reliability. Because of the iron, Stones and debris will not enter the equipment.
The crushing method of the large wood crusher is selected based on the physical properties of the material, the size of the material block and the required degree of refinement. For hard materials, crushing, bending and cracking should be used; for brittle materials, should be used Impact and crushing; when the blocks are relatively large, the crushing and bending methods should be used; if the blocks are small or the size of the discharged particles is not large, impact and grinding should be used. If the crushing method is not selected correctly, it will not be broken or excessive. Crushing, both of these will increase the energy consumption during the crushing process.