Drum chipper is a piece of equipment for producing high-quality wood. This equipment is widely used in industrial production such as paper mills, wood chip mills, bamboo processing plants, etc. Because this equipment has wide applicability and is simple and convenient to operate, it has been put into the market and received an enthusiastic response, prompting nationwide The production of chippers has mushroomed in various places, but as for the chippers currently on the market, there is generally a trend that is not very mature, such as high production energy consumption, serious noise pollution, poor equipment performance, etc. series of questions.
In response to these problems, Jiuzhou Shangyang continuously improves the machine and strives for excellence in technology. Users are full of praise after using it. The body of this drum chipper is made of high-strength steel plates, which is the supporting foundation of the entire machine. .The flying knife is installed on the cutter roller, and the flying knife is fixed on the cutter roller through professional flying knife bolts and pressure blocks. According to the different thicknesses of the raw materials to be cut, the upper feeding roller assembly can use the hydraulic system to move up and down within the relevant range. Floating. The cut qualified pieces fall through the screen holes and flow out from the bottom. The larger pieces will be cut in the machine.
Hydraulic system: The hand oil pump supplies oil to the oil cylinder, which can activate the cover to facilitate the replacement of the blade. During maintenance, the upper feeding roller assembly can be lifted to facilitate the adjustment of the gap between the flying knife and the bottom knife and the disassembly and assembly of the comb plate. .
Drum chipper equipment configuration: solid bearings have been carburized and heat treated, with high stability, high hardness, stronger and more practical; the use of brand motors has stronger power, is not easy to pull the cylinder, and is practical for a long time; the size of the feed port has been strengthened. Enables large and small wood to be fed easily, the scraps are not easy to pop out, and the material can be discharged with confidence; the feeding rollers are arranged staggered with a zigzag outline, which greatly reduces the cost.
