The stump grinder motor and the transmission part of the machine are belts. When used for a long time, they will slip. First, stop the equipment and adjust the belt tightness.
In the case of multiple loosenings, the position of the motor should be adjusted. Then slow down the stump crusher, loosen the fixing screws of the motor, and move the motor to a reasonable position; when the belt cannot be too tight, it will affect the performance of the belt. Use period. After the belt is damaged during use, be sure to replace it with a new 3-angle or V-shaped belt. When replacing the belt, the length and pulling force must be consistent to avoid premature damage due to uneven force. Adjustment of the 3-angle belt of the tree stump grinder, If it is pulled too tight, it will also reduce the speed of the motor, causing the motor bearings to heat up; and if it is too tight, the belt will easily slide, which will easily affect the life of the motor and belt.
This equipment is a type of high-efficiency destruction and environmental protection equipment that can destroy various tree roots. The destruction rate of tree roots by the tree root destruction equipment can reach more than 95%, and the destruction rate is moderately good. The achievements in this field must be attributed to the tree root crusher. It can not only crush the tree roots and recycle them to make biomass fuel, but more importantly, it has significantly improved the environment so that the tree roots cannot be thrown away. Where it fell.
Manufacturers that can produce large stump crushers and root crushing equipment need to have a certain scale and strength. Manufacturers that invest in purchasing large stump crushers must have many production requirements, so they need to be produced by manufacturers with certain strength. Only the crusher produced can meet the needs of consumers, and the quality of the equipment produced can be guaranteed.
Manufacturers that produce large stump crushers need advanced professional skills. High-tech is constantly advancing, and consumer demands are increasing. Only high-tech equipment can meet our needs.
Therefore, the tightness of the tree stump crusher belt can also be adjusted by adjusting the bolts of the machine base and using the adjusting bolts to change the position of the motor on the slide so that the 3-angle belt reaches the required tightness, and then tighten the fixing bolts. Tighten it up, and press it with your hands after installation to allow the belt to float up and down, and then adjust the belt to the ideal position.
