To adjust the gap between the compaction plate of the tree stump crusher, you can use the adjustment busbar hinge (about 3~6mm) to adjust the distance between the busbar and the main shaft. In daily life, adjust it to the high quality of the pressure plate and main shaft. A gap of about 1mm. If the gap is very large, it is likely to leak. If the gap is too small, the picking spindle will create a V-shaped groove on the pressure plate, thereby damaging the component.
By adjusting the relative position of the adjustment plate and the round hole on the support frame, the torsion spring tension of the crusher busbar can be adjusted. From the rotation of the adjustment plate until the torsion spring just contacts the stress plate, the front cotton picking head rotates again and adjusts to 3 of the adjustment plate. holes, the rear cotton picker is adjusted to 4 holes, aligned with the 2 ends of the holes stabilized on the stabilizing plate. Insert the support frame into the flange screws. When adjusting the crusher, first adjust the busbar on the top of the cotton picker head, and only Only tighten the busbar on the top of the cotton picker when necessary.
The length of the booms on both sides of the front beam of the cotton picking machine should be adjusted. During the operation of the crusher, the front roller is 21mm lower than the rear roller, which makes the picking spindle touch more cotton wadding and allows the residue to be discharged from the cotton spinning machine. .The bottom of the cotton picking machine head is out of the way, and the tilt should be adjusted in the cotton warehouse.
Basic concept of stump grinder:
The raw materials are hand-pushed into the feed port and rotated by the high-speed transmission gear roller, and then the raw materials are fed into the knife cutting structure. The high-speed running cutter head and hammer are used for crushing and cutting of the high-speed running cyclone. .The relative speed of the tooth plate is ground into loose fragments and thin strips, which are thrown out of the body by the fan. The length of the material can be adjusted according to the gear shift.
This series of stump crushers is a multi-functional machine and equipment, which is also a crusher used in one type. In order to better solve the problem of straw consumption in the breeding process, this machine and equipment can generally crush cattle, sheep, horses and other livestock The remaining straw is broken into filaments at once using the high-speed cutting principle. The length and width can be adjusted at will. The machine can also break crops (such as straw) into foam, which is used in family life. It has been recognized and trusted. It is suitable for raising small and medium-sized animals such as white geese. The machine adopts an automatic feeding system and a multi-blade cutting working principle. It can make various types of straw and fresh straw powder into ideal needs according to needs. .This machine equipment is mainly used for: green, wet and dry straw, the crushing particle size distribution can be automatically adjusted, which is also the personalized role of the machine equipment, because not only can fresh straw be broken into sawdust, the size of the straw can be automatically adjusted .
