tree grinderThe main machine is mainly composed of a frame, a rotor disk, a hammer, a screen, a feeding tray and other components. The screen of the wood crusher fully exerts the effect of material screening and filtering in the overall operation process, while ensuring the crushing gap of the hammer. The size of the wood crusher is also the location that is prone to obvious damage among the components of the wood crusher. Customers must replace this component after a certain period of time. The replacement of the display screen of the wood crusher is actually relatively simple and can be completed in just 35 minutes. Simple summary It only takes 4 steps to do it. Lay the screen of the wood crusher on the pressed screen, and use a tight screen to tighten it on the pressed screen. Be careful not to pull the net too tight. Step 2 The lower pressure mesh ring and the special mesh for the grading screen are lightly pressed on the upper pressure mesh ring with bolts. Pay attention to the symmetry of the bolts and press evenly. The third step is to lock and structure the reinforced screen body. The fourth step is to lock and structure the reinforced screen body. Turn the rotor of the tree grinder to ensure the gap between the cutter head and the display screen for safe operation.
