The wood crusher is a kind of crushing mechanical equipment. It is widely used in many industries in our country and helps recycle a large amount of waste wood for secondary use, solving the pollution caused by these waste wood during the treatment process. However, Most people don’t pay much attention to the maintenance and upkeep of wood crusher equipment. This also causes many wood crushers to often break down after being used for a period of time, with output declining rapidly, crushing efficiency decreasing, crushing capacity decreasing, clogging, etc. If problems occur, if you want it to be able to perform production operations under high-intensity conditions for a long time, daily maintenance and upkeep are definitely indispensable.
The wood crusher uses blades to continuously cut the raw materials to achieve the crushing effect. During this process, the blades will inevitably rub against the raw materials. If this happens for a long time, the blades will become excessively worn and damaged. So every half month we have to check how the blade is being used. If we find that the blade is worn, we need to polish it in time to avoid the wear getting worse. If the wear is serious, we can only replace the blade with a new one. Okay. Let me remind you that we can also inject lubricating oil into the blade surface to reduce the friction between the blade and the raw material, thereby reducing blade wear.
In addition, we should also pay attention to the following 4 points:
1. After the wood crusher has been working for 8 hours, it can be shut down for a rest. When shutting down, be careful to stop feeding first and then turn off the power. Especially in summer and when the weather is hot, shutting down can play a role in the damage to the machine. cooling effect.
2. Every working shift, butter needs to be added to the wood crusher. You can use a grease gun to add it. During the process of adding butter, be careful not to add too much butter.
3. After the work is completed, the machine needs to be cleaned, especially the inside. When cleaning the inside, you can use various tools in the tool box to open the outer casing of the machine, carefully clean the inside, and remove the dirt. Wood chips left in the machine.
4. Check each component. Before starting the machine, check the stability of the screws, the tightness of the 3-angle belt, whether the wearing parts such as the screen and the cutterhead are damaged, and then replace them in time.
