The materials that can be disposed of by large-scale wood crusher equipment are commonly seen waste wood waste, discarded furniture, discarded wood boards, scraps left over from wood processing, tree poles, etc. These materials are discarded and no one uses them. Waste materials are recycled and processed through wood crusher equipment to produce wood chips. This type of wood chips is also widely used. This type of wood chips can be processed into biomass fuel through a biomass pellet machine for burning in power plants or as domestic fuel. The application rate is high. , conducive to storage and hygienic use; it can also be used for edible fungus cultivation, paper making, etc., providing a good material foundation for the industry.
The large wood crusher equipment itself is reasonably designed and can withstand high-intensity impact loads. During the application process, parts will be worn or deformed due to beating, collision and other factors. This is also unavoidable. So how to prevent such parts What about the replacement frequency? Now let me introduce to you:
1. The average value must be maintained when adding materials. The particle size of the input materials should be based on the hardness of the material. The diameter of hard materials should not exceed 3cm. Hard metal objects are prohibited from entering the discharge port.
2. During the application process, the motor load must not be overloaded and maintain normal operation.
3. The wear order of the blade and grinding plate should be checked frequently. If the blade and grinding plate are found to be seriously worn, they should be replaced in time.
4. When the edges and corners of the hammer blade of large wood crusher equipment are worn, the angle can be changed and turned around 4 times. It can be repaired and reused by welding with high-chromium welding rods.
Wood crushers require regular repairs and maintenance. If problems do occur, you will truly realize how critical daily repairs and maintenance are.
