tree grinderThe application of the crusher is more reliable and environmentally friendly. It can automatically adjust the feeding speed according to the load of the main motor to prevent the machinery and equipment from running at full load. What is the shockproof foundation of these crushers? The following is the editor's summary:
1. Firstly, when choosing a tree grinder, its type is consistent with the motor. Because of the area of the motor, it is easy to see the shortcomings of the motor, such as heating or even ignition. Secondly, the equipment is getting better and better. During the performance A link; the falling or damage of other fan blades will also cause the motor to heat up. At this time, you must understand the motor and check whether the blade has fallen off or is damaged, so as to find the problem early. Secondly, the rated power of the motor of the machine is too high. High. If the wind force is too high, it will be too late to blow out the vents under strong winds, resulting in low production. Repeated damage to the furnace circulation system materials and materials will also cause the motor to warm up.
2. Open circulation system and closed circulation system In production, the circulation system is divided into closed circulation system and closed circulation system. The former one is called the sieve before destruction, and the latter one is called the sieve after destruction. In specific production, Open or closed circulation system can be selected according to production requirements.
3. Load: The operation process of the tree crusher is carried out in a closed loop. With the addition of the air outlet and circulation system load, the stone shape will become better. In the process, due to the increase of circulation system load, all the machines in the system will be damaged. However, when the discharge port is added, the load of the main crushing motor can be reduced, and the appearance of the finished material particles becomes better. Therefore, it is important to adjust the cycle load in production.
4. Input particle size: Compared with tree crushers, the standard sizes of different types or different types of processable input materials are different. If the feed particle size is not suitable, the output quality will not be qualified, so the feed particle size should be Meet the requirements of the production machine. Do not let large ores and uncrushed materials enter the crushing chamber. Although there is a good steel protection system in the crusher, the aggressiveness of these uncrushed materials will not only affect the output quality, but also increase the impact of the crusher. The workload can easily cause the crusher to break.
The tree crusher has the characteristics of large crushing rate, low energy consumption, stable operation, easy structure and convenient operation and maintenance. I hope the above content will be helpful to you.
