In the past few years, the sales volume of tree crushers has also doubled due to the continuous increase in social demand. In order to facilitate customers to promptly understand the problems that may arise in the application of tree crushers, Zhongmian Company provides examples of simple problems with tree crushers. Solutions are provided.
1. What to do if output decreases
The decrease in output indicates that the cutter head may be dull. Just remove the cutter head and polish it with a sharpener; the cutter head has a long service life and can be recycled until the cutting edge is worn out.
2. What to do if the rolling bearing is overheated?
The transmission belt is too tight, the bearing is damaged or the motor rotor or the bent shaft is unbalanced, etc., which will cause the bearing to overheat. What should I do to solve the problem? Adjust the tightness of the transmission belt, add and replace engine oil, motor rotor, shaft, and bearings. You can try any replacement, etc.
3. How to solve the obvious vibration of the equipment
The main shaft bearing of the machine tool is damaged or bent; the foot connecting bolts are loose; the hammer is installed incorrectly; the weight error of the two sets of hammers is too large, which will cause obvious vibration wear. Use a face-turn hammer to install the error factory maintenance hammer assembly, and the crusher hammer should be Take correct measures to install and maintain the balance of the motor rotor.
4. Fan blades are loose or broken:
When the auxiliary fan blades are loose, the product fineness will suddenly become wider and the fluctuations will be larger. At this time, the wood crusher body will swing slightly, and it should be shut down in time for inspection and treatment.