1. Properly increase the vertical return duct of the drum-type tree chipper: the middle vertical return duct on the cyclone storage should be appropriately raised, but ensure that the particle size of the powder meets the standards. The middle vertical return duct is too high and interferes with production. If the amount is too low, it will cause the pipe to be blocked. The smoke and dust will precipitate from the primary return air duct, and the water vapor in it will stick the smoke and dust to the pipe diameter, reducing the pipe diameter, causing the air flow circulation to be blocked, affecting the production volume, and the motor will easily get hot. The solution is to open a window in the pipe diameter and process it on time.
2. The vertical return duct is combined with the cutting trough: The vertical return duct on the drum tree chipper is placed on the side according to the equipment design standards. It is often closed due to material obstruction, interfering with ventilation and production capacity. After considering When dust-proofing, it is converted into a material opening chute, perpendicular to the wood chipper material opening, thus solving the blockage.
3. When placing an annular water spray ring, some residual air and a small amount of smoke and dust can be precipitated in the settling chamber using the return air inclined pipe. An annular water spray ring can be placed at the entrance and exit of the pipe to form mist-like water to promote the precipitation of smoke and dust.
4. Arrange a fan at the end of the sedimentation chamber: The sedimentation chamber is composed of multiple side walls. The smoke and dust are driven by the force of the fan to precipitate. An exhaust fan is installed at the rear to discharge the remaining water vapor and smoke, and then dispose it in the pool. This ensures that The pipes of the tree chipper are not blocked, and dust removal at each local dust-proof point is guaranteed.
5. Remove sediments on time: A small amount of smoke and water vapor extracted by the fan will impact the smoke and settle on the water surface due to the force of the wind. This part of the sediment must be fished out and processed once a week.
Tree chippers are widely used in various fields. Mainly because this equipment can crush some objects into small particles, their uses have become more extensive. Especially in the fields of food and agriculture, they occupy a very key position. Many farmers today use small tree chippers when planting. With the application of this tree chipper, agricultural straw can be crushed and the crushed straw can be stored and used as cattle and sheep. Waiting for animal feed.
However, since the drum tree chipper is an industrial equipment, it may be damaged during the application process, so it is necessary to have a certain understanding of the corresponding care and maintenance methods. When performing maintenance, you should Check the power connection status of the equipment, including the wiring status of the power supply. In addition, if the motor does not rotate when it is working, the motor should be inspected accordingly.
All in all, when applying a drum tree chipper, in order to ensure the normal operation of the tree chipper, you should have a certain understanding of the specific maintenance methods.