The drum-type tree chipper is mainly suitable for crushing various types of plants with a growth period of less than one year: such as crushing cotton, corn straw, green beans, pepper seedlings, etc. The crushing length can be made according to customer needs. The crushed agricultural products Plant debris can be used to make raw materials in various production fields such as organic fertilizers, fuels, plywood, paper, etc. This equipment utilizes a large amount of green waste that could not be sold to create new economic value, while also protecting the environment and improving It improves the soil and creates excellent social and economic benefits.
Disassembly and assembly of rusted threaded parts of drum-type tree chipper. Rusted threaded parts of tree chipper include nails, nuts, nuts, etc. When they are used for fastening or connection, they are difficult to disassemble and assemble because of rust. , at this time, you can use the following methods to disassemble and assemble.
1. Hit around the threaded parts of the tree chipper with a hand hammer to loosen the rust layer, and then screw it out.
2. You can first twist it a little in the tightening direction, and then twist it in the opposite direction. Repeat tightening and loosening in this way, and gradually tighten it out.
3. Pour some kerosene or loosening agent around the threaded parts of the drum tree chipper. After soaking for a while, gently hammer around to loosen the rusted surface slightly, and then screw it out.
4. If the wood chipper parts allow it, you can also use the method of quickly heating the component to expand it, and then quickly unscrew the threaded component.
5. Use turning, sawing, chiseling, gas cutting, etc. to destroy threaded parts
In order for the finished materials processed by the drum tree chipper to be of high quality, it is actually not that complicated and inconvenient. We only need to pay attention to some details during daily application. For example, we must ensure that when selecting materials The materials do not have any debris, because the purity of the processed materials is not high, there are debris, and they are contaminated. This is mainly because the debris was not noticed when feeding. To prevent debris from entering the inside of the tree chipper. One reason is to prevent the hardness of debris from being too high, causing some parts on the equipment to be worn and reducing its service life.
